Party Favour Tutorial

Still on the birthday theme (it was - after all - The Festival of Meeeeee!!!), I also whipped up some cute little party favours.

Again, really simple. A square of fabric (I think about 10 or 15cm square) trimmed with pinking shears. Some yo-yo's which I had made previously in a yo-yo-making frenzy, and some co-ordinating ribbon.

Contents were small wrapped Easter eggs, but you could use anything.

Construction was...

1. whip out the hot glue gun.



2. dab some hot glue on the back of the yo-yo's and attach each to a length of ribbon. I used a length of ribbon about the length of my forearm, but it will really depend on how big a bow you want, how long you want the tails to be and how much fabric it needs to get around.



3. wait until these dry. Shouldn't take too long.



4. Lay your fabric squares out and place the goodies in the centre.



5. Gather up the four corners of the fabric to make a little pouch.



6. Place the beribboned yo-yo's around the top of the pouch and wrap ribbon around a couple of times.



7. Tie ribbon behind the yo-yo's with a little bow.



8. Finished!!!

Place Card tutorial

Wow...three posts in as many days : ) You lucky, lucky things.

This is a really easy tutorial for placecards for a Special Occasion.

I made these for my recent birthday, which was on Easter Saturday, hence the proliferation of bunnies.

Sadly, I didn't take any photos of the individual steps, but these really are so simple.

Step 1 - Choose your theme and colours. Because it was MY freakin' birthday, I matched the colours with the dress I was wearing.

Step 2 - Choose your images. I used rubber stamps that I had, stamped and embossed them then coloured with watercolour pencils, but you could just as easily use pre-printed logos or pics or whatever, or print some clip art up. They will need to be on slightly thicker paper so that they stand up.

Step 3 - Decide how wide you want your placecards to be. In my case, this was governed by how I wanted the names to be on the cards. You could simply hand write the names, or use printed labels, but I used small alphabet stamps to stamp the names which I then cut around, so my width was determined by the longest name I stamped. Obviously, if you have a longer image then this may also determine how wide the cards should be.

Step 4 - Decide how tall you want your placecards to sit. This will be governed by the size of your images. If your images are tall then the height of your placecards will have to be sufficient to support them. As an example, my cards were 9cm wide across the front and about 5 cm deep, giving them a height when folded of about 2.5cm.

Step 5 - Cut around your chosen images, leaving a tab section along the bottoms of the images. LEAVING THE TAB SECTION IS VERY IMPORTANT!!! The tab should extend about 1cm below the bottom of the image. I cut just around the outside of the borders of the image, but you could cut in a square or circle etc, etc. Put the images to one side.

Step 6 - Fold the place cards in half along the short side, but then flatten out again.

Step 7 - Measure how long the tab on the bottom of your image is and then using a ruler and a craft knife cut a slit in the bottom half of the placecard. This will be where the tab of the image will go.

Step 8 - Stick a small piece of double sided tape on the back of the placecard underneath the slit you have just cut. This will secure the tab when it is poked through. I guess you could also use glue, but I prefer tape as it wont distort the card and it's easy to snip off the required length.

Step 9 - Assemble the placecards by tucking the tab through the slits and securing with the adhesive tape. It's easiest to do the cards one at a time as otherwise the tape could stick to everything else!!

Step 10 - Attach stamped or printed names or hand write names onto the place cards.

Step 11 - Refold the placecards in half and you should have an image which extends above the fold of the card and you are done!!

See...told you it was easy : )

Xmas Card Tutorial

See - this is what you get when I've been away for a wee while....MY VERY FIRST TUTORIAL!!! XMAS CARDS!!! WOOt!!!

*ahem*

Anyhoodle, the instructions are fairly simple.

Step 1 - gather your materials. You will need (most likely) the following items

• Some cardstock for the main body of the card. I have used red;
• Some plain coloured cardstock (I've used cream) for stamping on;
• some more cardstock in a contrasting colour. I have used green;
• Assorted stamps. I've used a music one and also a mistletoe one, some christmas themed ones and a merry christmas greeting, but use whatever you like or have on hand!
• Stamp pads - I think mine is an Adirondack one in a browny colour (maybe caramel?)
• An assortment of patterned, seasonal papers. I had a heap of partly used sheets in my stash. I've used all different, but you could use all the same. Up to you!!;
• Adhesive - whichever you prefer. I'm using an old Creative Memories strip sticky thingo, because that is what I had on hand!;
• Assorted tools - paper trimmer, pencil, scallop-edged scissors, eraser, ruler, sponge, eyelets and tool, normal scissors, water colour pencils or markers (if you use watercolour pencils you will also need a small paintbrush and some water) and ribbon or thread if you plan on having eyelets on your cards etc;
• and some scrap paper for masking, and I like to use some scrap paper to lean on when I stamp.

(you will note that my picture also includes some gel pens. I confess that I did not use these...also pictured is my scrubby stamp cleaner and a tatty old face washer to clean my stamps with.)

Step 2 - mark out the size of your finished base card onto the cardstock and cut out the appropriate pieces. Alternatively, you could just buy pre-made cards, but I couldn't find the colour I wanted. Just a reminder, if you check on the Australia Post website, they will tell you which sizes are preferred...and I think you can get cheaper postage (might pay to check with your local friendly AustPost peeps!!).



Step 3 - Measure a rectangle (or square if that is your shape) a bit smaller than the front of the card, and cut an appropriate number out of the printed paper. Trim with the scalloped scissors as shown in the photo. I have found - via trial and error - that it is best not to snip all the way to the end of the scissors, as they tend to have a little flat bit which will result in some odd shaped scallops. Attach to the front of the card in a centred position, top and bottom. Step 4 - Measure another rectangle (or again with the square) out of the contrasting card which is slightly smaller again than the base card. Trim with the scalloped scissors again and attach in a centred position to the patterned paper you have already stuck down.
Everyone still with me?

Step 5 - Measure yet another rectangle, this time out of the cream card. This will need to be slightly smaller again than the last rectangle you cut. This will be the card onto which you will stamp your images. I find it easier to measure all of these rectangles out, but to NOT cut them out until the stamping is finished. This way I don't have to fiddle with the card too much when stamping and masking.

Step 6 - Grab your stamps and ink and scrap paper. Stamp your main image onto the scrap paper and allow the ink to dry. Once this is dry, trim the image as close to the edges as possible. This is to create a mask for the next couple of steps. Your mask doesn't have to be too detailed. For example, I have not gone into the tiny details of the mistletoe sprig, but it still gives the effect I am after. Obviously, the two other rectangular stamps were far easier!! Step 7 - stamp your chosen images into the rectangles you have drawn on your cream card. I also printed my greeting onto unused card on the edge. Step 8 - Grab the mask you have made earlier. Place this as closely over the stamped image as possible. It is advisable to wait until the freshly stamped image is dry before you do this, otherwise you risk smudges! Stamp your music (or text - whatever) stamp over the top of the masked image.
Step 9 - Once the stamping is dry, using watercolour pencils or markers, colour the image as applicable. The photo illustrates my mistletoe card which had quite a bit of colour, but the other two images I had did not have as much colour. If you use water colour pencils, be careful that the stamped image does not run too much. I used pencils, and as the ink is not heat set it tended to run a little as you are dabbing it with water. Step 10 - Once the images are completely dry, cut the rectangles out and trim with the scallop scissors. Also trim your greeting. I have stamped my music image over my greeting without using a mask. Step 11 - Now the messy bit. Using a small piece of sponge, apply ink to the edges of the cream coloured card to make it look 'aged'.


Step 12 - At this point, you could use a punch and attach eyelets. I started to do this, but was having eyelet issues, so only made one card like this. If you do use eyelets, you can thread ribbon or embroidery thread or similar through them. Otherwise, skip this step.
Step 13 - Attach your stamped images to the front of your card!! And voila! you are done.

I made six of these for a Christmas card swap that I joined, and I think they turned out rather lovely (if I do say so myself!!!)